Development of single - stamping and multi - stamping machines

Development of single - stamping and multi - stamping machines

Tablet press is suitable for laboratory experiment production or small batch production of various tablets, sugar tablets, calcium tablets, heteromorphic tablets. The machine for continuous pressing is equipped with one set of punching die, with adjustable filling depth and thickness. The high speed rotary tablet press has the characteristics of high productivity, high pressure, continuous prepressure adjustment, compact structure, simple operation and maintenance, reliable operation, wide range of material selection, low operation cost and good performance ratio. In addition, the machine has the advantages of small vibration, low noise, low energy consumption, high efficiency and accurate weight.

When working, the machine should be rotated to a high position to observe whether the surface of the lower punch is flush with the middle die, or whether the surface of the lower punch is flush with the middle die. If not flush, loosen a butterfly screw and loosen the adjusting gear on the gear plate to make the lower punch face flush with the middle die. Then install the pressing plate and tighten the screw. It has the function of starting and stopping point and speed regulation. It can be connected automatically and reliably with screening, vacuum, testing, conveying, roller and other equipment on the production line to realize synchronous production. At the same time, external devices adopt different monitoring methods, providing a high level of security and reliability. Burrs, flaps and powder tablets can be removed by an online detector.

Application of stamping machine: a rotary multi - stamping machine has appeared. At the same time, the pressure of the tablet press is uniform, so that the air in the drug particles has enough time to escape from the mold hole, improve the uniformity of the tablet density, reduce the fragmentation phenomenon. In addition, the rotary press has the advantages of low vibration, low noise, low energy consumption, high efficiency, accurate weight and so on. All kinds of impeller can meet the requirements of different materials, to ensure the feeding accuracy.

The vacuum monitoring function of the tablet press is to use the flow meter to check the vacuum pressure at the designated position in the vacuum tube regularly. The set value is compared with the measured value. If the detector does not detect the suction pressure in the suction pipe within 10 seconds, the tablet press will issue a fault alarm and stop working. This feature ensures a great deal of production reliability and allows for continuous dust removal during the tablet production process. All drug production line connection control technology is a new process to control production. There is no dead Angle in the tablet chamber at 360 degrees. The tablet, lower guide and lower roller are equipped with special installation for easy operation, disassembly and cleaning. Special oil-proof and dust-proof system can prevent the buffer from discharging and increase the buffer structure.