Selection analysis of bubble cover packaging machine Roller drum aluminum-plastic blister packaging machine with roller drum forming, sealing and feed roller, so that the blister belt in the process of running around on the roll will be bent, and therefore not suitable for forming large, deep and complex shape of blister, packaged drug volume is small, so now to packing all kinds of sugar pill, tablet, capsule and capsule. In addition, because the roller bubble cover packaging machine is vacuum negative pressure forming, the thickness uniformity of the bubble cover forming is poor, and the speed of forming can not be too fast, so the working frequency of the machine can not be too high, the general punching frequency is 30 ~ 40 times /min, which affects its application to a certain extent. However, from the development and needs of small tablet packaging and the advantages of the machine itself simple structure, low cost, vertical roller bubble cover packaging machine or has a conside

Bubble cover packaging machine maintenance introduction One. Daily maintenance 1. Check whether the power supply and electrical control switch, twist and other parts are safe and reliable. Check the working conditions of each part and whether there are abnormal phenomena and sounds. 2. The equipment should be kept intact, and the lines and pipes should be intact; 3. Ensure that all parts of the equipment operate flexibly; 4. Lubricating oil should be added in time according to normal operation requirements; 5. Check regularly whether the safety protection device is complete and reliable to ensure the safe operation of equipment; 6. Clean the machine after work every day to ensure that the machine is clean. Two. Monthly maintenance 1. Check whether Shenyuan and Shenqi control switches and twisters are safe and reliable, and whether there are abnormal phenomena and sounds at each part of the work. 2. Complete lines and pipelines, without defect of parts and components, 3. Equi