Precautions for operation of capsule polishing machine

Precautions for operation of capsule polishing machine

Before power on, rotate the principal shaft of the motor with hand to check there is no phenomenon of seizing-up.

Check every fastener to see whether it is tightened.

Insert the power plug of the vacuum cleaner in the socket under the machine body; connect the hose of the cleaner and the cleaner starts working first. Then switch on the power, pour a small amount of medicine, and regulate the speed-regulating knob to change the rotational speed till the clean degree of the medicine surface reaches a satisfactory effect. The rotational speed is inversely proportional to the clean degree.

In order to recover surplus medicinal powder, we suggest that the medicine should be sifted with a big mesh sifter before it is polished.

Add a small amount of starch to hairbrush and tie up the material outlet with towel so as to increase the clean degree of medicine surface.

Because the hairbrush and the net cloth give out heat when they rub during operation, too high degree of heat will affect the clean degree of medicine surface. Therefore, the operator must be sure that the continuous operation time should not be too long.

When polish different kind of medicine, the operator must clean the hairbrush, the net cloth and the material barrel.

The backup hairbrush should be suspended after cleaning, don’t be placed flatwise.

The filter bag of the cleaner should often be cleaned.