Adjustment of capsule filling machine before operation

Adjustment of capsule filling machine before operation

1) Switch on the power.

2) Check that all safety Settings are properly equipped and adjusted.

3) Without the capsule and powder, use the hand wheel to rotate the machine in the direction of operation for 1-3 times. After it is considered normal, the capsule and powder are put into the capsule bucket respectively. The height of the powder into the bucket should be 60mm lower than the high of the container. At the same time, the metering and distribution room should be more than half of the powder.

4) Adjust the filling rod preset and insert the depth of the metering plate.

5) After everything is adjusted well, press the main engine to start the switch, and the switch can be started for automatic operation after the normal operation.

6) Speed adjustment is carried out when the main motor is running.