Blister packing machine feeding adjustment

Blister packing machine feeding adjustment

Carefully check each mechanical part of the equipment is abnormal, according to the provisions of the clearance and cleaning equipment.

Check the connection of power supply, water source, air source and pipelines; Clear the obstacles around the body and check the fastening of bolts. Fill the machine with suitable lubricating oil according to the ambient temperature.

Put the material to be packed into the hopper.

Remove the cone plate sleeve outside the PVC bearing shaft, load the PVC drum into the bearing shaft, install the cone plate sleeve, and tighten the cone sleeve moderately.

Boot, in "manual mode", open the "heating, heating, heat sealing heating" function, inching devices, make PVC through preheating zone, forming die, loading area, test area, heat sealing mould, drawing gas holder, indentation die, blanking die, install the waste after cutting edge to waste collection agencies, to complete the installation of the PVC.

Remove the taper plate sleeve outside the aluminum foil bearing shaft, load the aluminum foil reel into the bearing shaft, install the taper plate sleeve, and moderately tighten the taper plate sleeve.

PTP aluminum foil storage and feeding mechanism is mainly composed of the main support plate, feeding shaft, swing balance roller and a folding roller. Used to store the aluminum foil and straight into the heat sealing parts, ensure no wrinkles after sealing, first touch foil loading axis control button, shrink loading shaft, then loosen the lock nut on the main support plate aluminum foil according to the equipment on the aluminum foil around to sketch, after installed, once again touched the aluminum foil bearing axis control button, open the loading axis, then lock lock nut is fixed on the main support plate aluminum foil.