Views: 0 Author: Site Editor Publish Time: 2021-05-28 Origin: Site
Check the tablet press before use
1, before use must be repeated to check the quality of the die, whether there is a lack of edge, crack, deformation and loose incomplete situation and whether the device is complete and good work.
2, Check whether the powder of the granule raw material is dry and the powder content in the granule is not more than 10%. If unqualified do not hard press, otherwise it will affect the normal operation of the machine and service life and raw material loss.
3, for the first time commissioning should be needle placed 6, pressure regulator control instructions will FenZi inside bucket, turn the commissioning the handwheel by hand, adjust the filling and pressure at the same time, gradually increase to the weight of the tablet and the degree of hard and soft to fulfill the requirements of the finished product, and then start the motor, first to open the clutch, an official production operation, in the process of production, must be time to sample the quality of the tablets, If it meets the requirements, it shall be adjusted if necessary.
4, The choice of speed has a direct impact on the service life of the machine. Due to the nature of the raw material, the viscosity, the size of the sheet diameter and the pressure can not be unified in the use of the machine.
Quick application for pressing bonding, good smoothness and easy to form materials. Therefore, the user must be determined according to the actual situation.
5, in the use of the machine should always pay attention to the sound is normal, in case of screams and strange sound is parked for inspection and elimination, not forced to use.
6. Managers must be familiar with the technical performance, internal structure, operation principle of control mechanism and shall not smell the working place during operation. In order to prevent failure and damage parts, so as to ensure safe production as the premise.