News Room
You are here: Home » News Room » PRODUCTS NEWS » Cleaning of blister packaging machine

Cleaning of blister packaging machine

Views: 0     Author: Site Editor     Publish Time: 2020-09-11      Origin: Site

Cleaning of blister packaging machine

The blister packaging machine must be operated by fixed personnel, familiar with the procedure of starting and making the blister. It can simply start the instrument and change the parameters. The mechanical instrument debugging personnel must pass the strict inspection, can grasp the instrument performance, the working procedure, the working mode, the working condition, the common fault detection and the processing; No one else is allowed to operate the touch screen to change parameters and so on. Carry out daily maintenance regularly to make the computer instrument panel inside and outside clean and dry; Check the terminals periodically for looseness. Keep the circuits and air lines clear.

Basic cleaning includes:

After the shutdown, the measurement parts should be cleaned in time, such as particulate matter, liquid liquid, solid packaging. For hot - sealed parts, wash frequently to ensure a clear seal texture.

The photoelectric tracking head, namely the electric eye, should also be cleaned regularly to ensure the cursor tracking error is small.

The products on the plate should be cleaned in time to keep the parts clean.

Clean the dust in the electrical control box regularly to prevent malcontact and other faults.

The fixation, supply and maintenance of gearboxes and moving parts must be checked within one week after the use of newly installed machinery; Then check the maintenance status monthly.

Check the screws in every part of the packing machine regularly to prevent them from loosening.

Pay attention to the anti-crack, anti-moisture and anti-damage of electrical components. The inside and terminals of the control box should be kept clean to prevent electrical failure.

When closed, the two heat sealing rollers should be in the open position to prevent the packaging material from burning.

Adjust the feed of each gear of the packing machine, the oil hole of the seat bearing and the feed of each moving part, lubricate the oil. Please pay attention not to leave oil drops on the belt when refueling, so as not to cause slipping or damage the belt aging.

铝塑铝

  info@hanyoo.net
  0086 25 5621 6295
  0086 25 5621 6289
  0086 187 5183 8183
  No. 380 Sanqiaogeng, Gaochun District,
Nanjing, China. 211300

Quick Link

Products

Leave a Message
Contact us

QR Code

Capsule Filling Machine, Blister Packing Machine
Copyright  2016 Jiangsu Hanyoo Pharmatech Co., Ltd. All rights reserved. Capsule Filling Machine, Blister Packing Machine, Cartoning Machine Professional Manufacture.