Maintenance of tablet press

Maintenance of tablet press

1. According to the friction and lubrication, to ensure the operation of the machine and extend the service life of the important link, especially the oil shortage and drying of the main sports will cause parts damage and can not be used, so the machine should be used before the empty operation, oil and lubrication friction surface, can be operated. In the future, regular refueling every shift, but each refueling should not be excessive, so as not to spill the influence of cleaning, stained tablets.

2. Check whether all screws are loose before each shift, and pay attention to them when working. Tighten immediately to avoid failure.

3. Conduct multi-slice artificial pressure test before and after each shift. When there is no problem, the automatic tablet press should be started.

4. In the stamping process, the quality of the mold should be frequently checked, such as rimless, cracking, deformation and other serious damage, should be replaced in time, so as not to damage the machine, affect the quality of the plate.

5. After daily use, the residual powder particles should be removed and all departments of the machine should be cleaned. When the machine is out of service for a long time, it is necessary to remove the mold, clean all the friction surfaces and working surfaces of the machine, apply anti-rust oil and cover the dust cloth; Molds should be cleaned and stored in oil.

6. Check parts regularly, twice a month.