Method for replacing upper and lower modules of automatic capsule filling machine

Method for replacing upper and lower modules of automatic capsule filling machine

Loosen the fastening screws of the upper cover of the turntable to remove the upper cover and then loosen the fastening screws of the upper and lower modules to remove the upper and lower modules. Then install and replace the lower module of another specification. Align the two positioning holes of the lower module with the two pins of the T-axis and tighten the upper screw. Next, install the upper module. The concentricity of each pair of upper and lower module holes must be Correct at the eighth station, insert the module debugging rods into the two diagonal die holes on the left and right of the module to correct the concentricity of the upper and lower module die holes, and then tighten the screws to ensure that the debugging rods are in the upper and lower die holes Flexible in rotation. 

※ Note: When replacing the module, use the handle to turn the machine. Before turning, you must remove the debugging rod!