Operation mode of capsule filling machine

Operation mode of capsule filling machine

The powder delay time in automatic operation mode is used to control the paper feed motor. Generally, the powder delay time is about 5-10 seconds based on different powder fluidity. For example, when you set 5 seconds, when the sensor cannot detect powder, the machine will automatically stop after running for 5 seconds. And the horizontal position of the sensor is movable.
"Capsule delay" is used to detect capsules in the capsule hopper. When the sensor cannot detect the capsules in the capsule hopper, the machine will automatically stop after the set time. Same as the powder delay function. Normally, the capsule delay time is about 20-40 seconds. , Depending on the speed of your machine.
The paper feed delay time is used to set the paper feed time after the powder sensor cannot detect the powder. Generally, NJP-200/400C models set the paper feed delay time to 6 seconds. The NJP-800C model sets the time to 12 seconds. The NJP-1200C model sets the time to 15 seconds. The NJP-2000C model sets the time to 25 seconds. The NJP-3500C model is set to 40 seconds. Due to the nature of the powder, the time may vary slightly.
The timing feed in manual operation mode is used to set the time feed in manual operation mode. For example, when it is set to 5 seconds, the filling interval time is 5 seconds. Paper feeding time is the powder feeding time set in manual operation mode. For example, when the setting is 5 seconds, the powder filling time is 5 seconds.