Views: 0 Author: Site Editor Publish Time: 2021-01-07 Origin: Site
Tablet classification of tablet press
For tablet manufacturers, the product is no longer a single round tablet, but has a variety of diversified requirements.
(1) From the shape to the points, there are ring, square, trapezoid, oval, triangle, spherical, petal shape, deep concave, shallow concave and a series of various requirements. To achieve these tablet products to suppress, the punching die need customized according to user's tablet products, most of the non-standard punching die, habits will suppress square, trapezoid, triangle, petals noncircular tablet punching die is called alien dies, this kind of punch punch needs to be configured on the directional keys, turret punch holes need machining keyway and punch to cooperate to complete the tablet for suppression.
(2) from the color points, there are monochrome, two-color, etc. Monochrome sheet is pressed with one kind of material, two-color sheet needs two kinds of materials (that is, two kinds of materials pressed into a tablet, but the hierarchy, color is clear), and to achieve the two-color sheet pressing, it is necessary to transform the down punching guide system of the tablet press, to achieve two filling, a piece. Among them, if a special tablet device is added, the content of one of the materials can be measured to control the ratio of the two materials.
(3) from the word or no word to divide, with Chinese characters, with letters, with graphics and so on. The realization of the tablet suppression is also based on the sample of the user tablet products to customize the punching die, processing the corresponding Chinese characters or graphics on the punching die to achieve the suppression of the tablet.
(4) From the size of the shape to divide, there are standard shape size, there are large specifications. For the very large size tablet products, not only the large size die should be customized, but also the structure of the tablet press should be reformed, mainly the filling regulation system, the pressure regulation system, the guide rail system and the rotary table should be reformed.