Views: 0 Author: Site Editor Publish Time: 2020-09-17 Origin: Site
The difference between a single stamping machine and a rotary stamping machine
A single stamping machine works by pressing powder particles into pieces.
Single stamping machine excellent performance, adaptability, easy to use, easy to maintain, manual and electric two ways to work. Single stamping machine only one stamping die, easy to use, by the pharmaceutical industry and other welcome. The tablets are of average thickness and do not require reprocessing.
Rotating machinery concrete working method of the compressor is a rotary tablet, basic guide manufacturers need to periodically check the machine and spare parts, bearings, turbine pressure, crankshaft, and so on up and down, found that the problem must be solved, otherwise it will damage the machine running, after each use, need to clean the residual material, if must use for a long time to die down and clean.
The maintenance of the die should be put in a rusty box. If no iron box is available, special iron boxes should be customized for use with stamping dies.
Equipment to be used must be clean and dust must not be mixed on edible tablets.
The installation method of rotary press is mainly divided into the manufacturer butt joint, unpacking, installation of the required wire is 380 volts, the wire must pay attention to the direction of the engine and the arrow is the same, in general, is the need to ground. Put it in a dry, clean place for better light.