The problem of blanking knife in blister packaging machine

The problem of blanking knife in blister packaging machine

1. The plate appears burrs and burrs

The blanking knife is blunt, it needs to be polished. Or change blanking knife.

2. Bubble around the plate

First, the left and right position and the upper and lower position of the blanking knife are not correct by moving the position of the blanking knife. Second, blanking knife die edge thickness is not less than 3 mm, block bubble from the edge is not more than 3.5 mm, so that it is easy to bubble or bubble scraping.

3. Loud blanking noise

Lack of oil lubrication or blanking knife back plate with waste edge caused by noise.

4. Blanking position adjustment

The blanking knife can be adjusted left and right by the four bolts fixed by the blanking knife, and the plate position can be adjusted up and down by the blanking stepping servo driver P7-03 by increasing or decreasing parameters.