Maintenance of single stamping machine 1, all moving parts on the surface of the friction lubrication is to ensure that the machine run properly and prolong the service life of the important link, especially if the main moving parts under the condition of lack of oil dry transit transfer quickly damage and cannot be used, so the tablet machine before use must be full cup of oil, oil hole, and the friction surface and lubricating oil, and empty operation make the friction surface is full of oil film, and then can be put into use. From now on, each shift refueling on time, but each refueling should not be too much, so as not to spill the influence of cleaning, stained tablets. 2, before each shift must check whether the screws are loose, in the process of work should also pay attention to check, if there is loose tighten immediately, so as to avoid failure. The main parts are: the upper punch fastening nut, the middle die fixing screw, the lower punch fixing screw; Connecting rod l

The development of single stamping machine With the continuous expansion of production scale and application scope, the single-punch tablet press is more and more understood and used by everyone, at the same time, people also put forward many new performance requirements. The defects of single punch press restrict the further expansion of its application range and can not meet the needs of some special production. Therefore, it is necessary to improve the performance of the existing single punch press to meet the needs of new era production. The application of distributed direct drive technology. The transmission system of traditional tablet press is complicated in structure, with high vibration and noise at high speed, and its controllability and flexibility are poor. Manesty British company production FlexiTab * type single stamping machine, adopting distributed direct-drive technology, the traditional transmission system is divided into multiple independent direct driving modu

Note for single stamping machine According to the friction lubrication, is to ensure that the machine running and prolong the service life of the important link, especially the rapid drying of major sports if lack of oil transfer cause damage and cannot be used, so the machine before use all the oil cup, add lubricating oil hole, the friction surface, idle machine to make all the friction surface coated in oil can be used. In the future, regular refueling every shift, but each refueling should not be excessive, so as not to spill the influence of cleaning, stained tablets. Each refueling location and the number of refueling should be planned. : Check whether all screws are loose before each shift, and pay attention to them when working. Tighten immediately to avoid failure. Its main components are: upper punch fixing nut, middle punch fixing screw, lower punch fixing screw; Locking nut and locking screw; Clamping nut, tension fixing screw for central grinding machine. Before and

The role of small single stamping machine Applicable to pharmaceutical, chemical, food and other industries, suitable for all kinds of granular raw materials pressed into sheet products, especially suitable for laboratory, hospital and small batch production. Is a small continuous electric table press, when there is no electricity can be manual press, can press all kinds of granular, crystalline or flowing powder raw materials into flake, cylinder, ball, convex, concentric circle. It is suitable for pharmaceutical industry, pharmaceutical companies, universities, security products, food, agriculture, chemical industry, electronic battery, ceramic metallurgy and other industries, and can also suppress the products with characters, trademarks, patterns. The machine has only one mold, which can adjust the filling depth and stamping thickness of the material, that is, the weight, thickness and hardness of the product. Just change different mold, you can press down different products.

The use of a single stamping machine Single punch press can press powder and granular raw materials into tablets, widely used in pharmaceutical, chemical, food, hospital, laboratory tests and other fields. The following points should be paid attention to when using a single stamping machine: Before the first use, you should carefully read the instructions against the actual machine before use. The machine can only run in a certain direction and cannot be reversed to avoid damaging the parts. In particular, don't ignore stress regulation. Belt tightening adjustment: It can be adjusted by two adjusting nuts on the electromechanical base plate and pay attention to locking. When there is no power supply, the triangular belt should be removed to reduce resistance and wear. But don't take the big pulley off, because the big pulley has the function of flywheel labor. The handle on the big handwheel should be lowered to avoid damage. No matter manual or voltage,