Attention to Capsule Filling Machine When checking the machine or changing the mold, it must be rotated with the handle, and the debugging lever must be removed before rotation. The filling machine is suitable for the filling of powder or granule pharmaceutical products, it is not allowed to fill with large pieces of material. For manual operation, one person must operate. In case of emergency, press the emergency stop button. When the machine is working, if there is peculiar smell or abnormal sound, stop the machine immediately and find the relevant maintenance personnel to deal with it. In addition to debugging and troubleshooting, the rest of the operation should be carried out under the condition of closing the four protective doors of the machine. It is strictly prohibited to remove the faults and foreign bodies in the machine with hands or tools when the machine is running. In order to ensure the cleanliness and safety of the production environment, the fault an

Installation of bubble cap machine mold Choose the required mold according to the product model and specification requirements. To install the forming mold, the empty white edge of the mold should be installed towards the feeding mouth, tighten the fixing screw, and fix the forming mold. Install the blowing mold, tighten the fixing screw, fix the blowing mold, adjust the distance between the blowing mold and the molding mold, so that it is in a horizontal position, and ensure that there is no air leakage, and then tighten the nut, so that the distance between the two remains the same. Install the post-forming guide plate so that it is at the same level as the high running position of the forming die. Install the guide track and adjust the height of the hot plate to match the packaged semi-finished product. Install the hot sealing die, tighten the fixing screw and fix the hot sealing die. Install the heat sealing mold (first fix the batch number mold of the heat sea

Selection of tablet press According to the production process and quality requirements of drugs, the selection of tablet press is mainly from the following aspects: (1) According to the characteristics of powder and particle, choose the appropriate tablet press (mainly Chinese medicine or western medicine, the composition proportion of raw and auxiliary materials, etc.); (2) Determine the output of equipment according to capacity and reserved capacity; (3) select the appropriate charging system according to the existing process; (4) According to the production record and deviation, equipment maintenance frequency and equipment control points in the production process of the product in the past; (5) the operation is convenient, reliable, there is a necessary adjustment device. Such as mechanical regulating device, filling regulating device, pressure regulating device, speed regulating device, sheet thickness regulating device, etc (6) The design of the tablet pressing room should

Vacuum separator adjustment of capsule filling machine The vacuum separator moves up and down once for each working station of the machine. The working position of the vacuum separator has been adjusted when the product leaves the factory, and there is no need to adjust it generally. If need to adjust can be divided into two vacuum separator adjustment at the same time and respectively adjustment of two methods; Adjustment method is to use the handle at the same time turn the main motor shaft, making vacuum separator to rise to higher position, loosen the machine panel under the lock nut on the end of a regulating rod (left, right screw thread) turn adjusting screw to adjust the height of the vacuum separator, (its separation module under the plane and the plane of the clearance of 0 ~ 0.03 mm) and then lock nut and the reinspection do not coincide several times, until the right. If there are two vacuum separators in the high point, the clearance between the two upper planes and the

The composition of blister packing equipment Blister packaging equipment by the anchor plate, castor, fuselage, PVC conveyor gravity roller, PVC conveyor turning roller, forming station, feeder, operating the monitor, guide rail, clamp device, detection device, heat sealing station, indentation location, identification detector, aluminum foil conveying weight of roll, twist roll, the charge weight of roller, waste rotary, waste itself, trip device, cutting workshop, finished product conveyor belt, trimming device, main motor, electric appliance box, etc. Adjustable stroke device: to change the layout size, without adding or changing parts, it can be changed smoothly and accurately. The plate heating device: the plate contact heating to change the traditional radiation heat conduction, shorten the heating time of PVC plastic sheet, effectively protect the molecular structure of PVC, save energy. Feeding device: it is composed of hopper, vibrating screen, dust collector and g

Tablet press die manufacturing Manufacturing of punching die. In die manufacturing technology, in addition to the choice of reasonable and affordable conventional processing means, whether the effective control of quality characteristics of the important items of precision, professional vacuum heat treatment technology is the most important means. Vacuum heat treatment is an advanced heat treatment technology with high efficiency, high quality, energy saving, clean and pollution-free and programmed control. One large can improve plate shape is the feature of surface hardness and surface brightness, and other related aspects of the surface quality and performance, such as fatigue and corrosion resistance, and have to improve the plasticity, toughness and fatigue strength of parts, small parts deformation, reduce artificial factors affecting the quality, etc., is a high quality tablet in the process of the die manufacturing indispensable key technology. Our company has applied advanced

Adjustment of capsule filling machine before operation 1) Switch on the power. 2) Check that all safety Settings are properly equipped and adjusted. 3) Without the capsule and powder, use the hand wheel to rotate the machine in the direction of operation for 1-3 times. After it is considered normal, the capsule and powder are put into the capsule bucket respectively. The height of the powder into the bucket should be 60mm lower than the high of the container. At the same time, the metering and distribution room should be more than half of the powder. 4) Adjust the filling rod preset and insert the depth of the metering plate. 5) After everything is adjusted well, press the main engine to start the switch, and the switch can be started for automatic operation after the normal operation. 6) Speed adjustment is carried out when the main motor is running.

Aluminum foam cap machine The aluminum plastic bubble cap packing machine refers to the advantages of similar foreign products, beautiful appearance, low noise, compact structure, smooth operation, simple operation, using the form of internal heating, PVC heating uniform, bubble cap forming is solid. Stop, boot does not exist bubble phenomenon, avoid the waste of packaging materials. Filling, blistering, heat sealing, printing batch number, plate blanking can be operated continuously, convenient installation, debugging and maintenance, small volume, low price, light weight, is the advanced aluminum plastic blister packing machine at home and abroad. The aluminum-plastic blister packing machine adopts frequency conversion speed regulation and automatic control technology of machine, electricity, light and gas integration, and is innovated in strict accordance with the requirements of pharmaceutical GMP standard. It has adjustable stroke, photoelectric matching plate with text and tex

Die design of tablet press Design of pressing die for tablet. The design of pressing die should not only properly coordinate the selection of association, such as the punching body of the upper and lower punching rod and the punching rod hole, the outer diameter of the middle die and the middle die hole, the lower punching rod and the filling protection guide rail, the punch and the inner hole of the middle die, but also make the forming tablet safely exported. In addition, special attention should be paid to the shape design of the die. For the manufacturers of tablets, the focus is mostly on the degree of convenience for patients to chew or swallow the tablets, improving the therapeutic effect and the appearance of the tablets. As a tablet die manufacturer, it is an important part of our work to design a die that meets the needs of customers. In order to ensure its service life, die design usually follows three design principles: beautiful shape, smooth release and high bearing

Structure of capsule filling machine Capsule filling machine structure, the top of the drum is a large volume of empty capsule groove; At the upper end of the rotary cylinder, the outer layer is provided with a feeding pipe, the lower end of the feeding pipe is provided with a door to control the discharge of the capsule, the feeding pipe is near the inner side of the rotary cylinder is provided with a fork, the outer side is provided with a locking rod; The inner layer of the rotary cylinder is provided with a measuring tube, which, in addition to the rotary motion with the simplified body, is vertically moved axially according to the curve of the CAM groove within it. The lower flange of the rotary cylinder is provided with the upper supporting cup fixing mold corresponding to the number of feeding pipes, which can limit the drop of the cap when the empty capsule is opened, and keep the cap in the upper supporting cup mold; Flange flange is above the positioning device, complete t